Variants:

Mota 1,75 m bench
Mota 3 m bench
Mota seat

LEG: This bench incorporates legs with armrests included, manufactured in GG-20 perlitic cast iron, each weighing 15 kg. The anchoring bolts are of M-10 zinc-coated steel and 120 mm long.

SEAT AND BACKREST: Each made up of three FSC-certified tropical wood strips, two central ones measuring 100 mm wide and 30 mm thick and one side one measuring 140 mm wide and 30 mm thick. The bench as a whole is reinforced with two rails, one on the seat and the other on the backrest, of galvanised iron 3 mm thick.

BOLTS AND SCREWS: In A4 stainless steel.

LEG: A coat of rust-resistant zinc dust primer. Finish with a polyester resin based dust coating, specially for exteriors.
The standard colour is steel grey, foundry effect. For other options, please consult the factory.

SEAT AND BACKREST: The six strips of wood composing the seat and backrest are treated with an initial coat of penetrating Lasur, clear-dyed, glossy, based on acrylic and alkyd resins in aqueous phase emulsion and two coats of finish Lasur, clear-dyed, glossy, based on acrylic resins in aqueous phase emulsion.

Weight of 1,75 m bench: 55 kg
Weight of 3 m bench: 91 kg
Weight of seat: 38 kg