BASE
Metal plate on concrete slab anchored by mechanical or chemical plugs.

STRUCTURE
Curved rods welded to form T-shaped ribs, brackets and structural support tube in ST-52 grade steel. All the metal parts are welded and the entire assembly hot-galvanised by immersion.
Rectangular solid Brazilian oak battens with shaped battens on the ends.

NUTS AND BOLTS
in stainless steel.

BASE:
Metal plate on concrete slab anchored by mechanical or chemical plugs.

STRUCTURE:
Curved rods welded to form T-shaped ribs, brackets and structural support tube in ST-52 grade steel. All the metal parts are welded and the entire assembly hot-galvanised by immersion. Solid rectangular Brazilian oak battens with shaped battens on the ends.

NUTS AND BOLTS:
In A4 stainless steel.

STRUCTURE:
Galvanised finish.

SEAT AND BACK:
The wooden battens forming the seat and the back are treated with a first coat of transparent stained Lasur primer, based on acrylic and alkydic resins in an aqueous phase emulsion, and two coats of transparent stained Lasur varnish based on acrylic resins in an aqueous phase emulsion.

Total weight: 238 Kg.
DIMENSIONS
Height: 950 mm.
Length: 4000 mm.
Depth: 660 mm.