Variants:

Bc 2.60 m double BENCH.

Bc 2.6 m BACKLESS BENCH.

LEG:
Made in GG-20 pearlite cast iron.
The anchorage bolts are M-10 zinc-coated steel, 120 mm in length.

BATTEN SUPPORT:
Metal profile made out of AISI 304 stainless steel.

BENCH SEAT:
Consisting of thirty-six battens, 404 mm long, 65 mm wide and 20 mm thick, joined crosswise by another batten, 2600 mm long, 100 mm wide and 34 mm thick. All made out of Iroko wood.

BACKLESS BENCH SEAT:
Consisting of thirty-six battens, 450 mm long, 65 mm wide and 20 mm thick, joined crosswise by another batten, 2600 mm long, 100 mm wide and 34 mm thick. All made out of Iroko wood.

BACK:
Consisting of thirty-six battens, 510 mm long by 65 mm wide, curved lengthwise for greater comfort. Joined crosswide by another batten, 2600 mm long, 100 mm wide and 34 mm thick. All made out of Iroko wood.

NUTS AND BOLTS:
In A4 stainless steel.

LEG:
One coat of rust-proof powder primer, rich in zinc. Finished with a polyester resin-based powder coating especially designed for outdoor use.
The standard colour is cast iron black. Contact us for other options.

BATTEN SUPPORT:
A coat of high-adherence primer, phosphochromate treatment with butyral polyvinyl and phenolic resin with a high content in zinc chromate as a rust-proof pigment.
Finished with cast iron black polyester-resin based powder coating, especially designed for outdoor use.

SEAT AND BACK:
All the wooden battens forming the seat are treated with a first coat of transparent stained Lasur primer based on acrylic and alkydic resins in an aqueous phase emulsion and two coats of transparent stained Lasur varnish based on acrylic resins in an aqueous phase emulsion.

Weight of single bench: 200 Kg.
Weight of double bench: 438 Kg.
Weight of small backless bench: 132 Kg.