LEG:
Made out of steel, hot-galvanised by immersion. Anchorage with 10 mm diameter metal plugs.

SEAT:
Consisting of pine blockboard batten, processed in a grade 4 autoclave, 442x140 mm and in three standard lengths: 3000, 1750 and 750 mm.

BACK:
Consisting of a pine blockboard batten, processed in an autoclave, 535x80 mm and in three standard lengths: 3000, 1750 and 750 mm.

NUTS AND BOLTS:
In A4 stainless steel.

LEG:
Galvanised finish.

SEAT AND BACK:
Treated with a first coat of transparent stained Lasur primer, and two coats of transparent stained Lasur varnish, both based on alkydic resins.

Right-hand leg: 18 kg
Left-hand leg: 18 kg
Middle leg: 32 kg
Concave middle leg (136º):32 kg.
Convex middle leg (209º):32 kg.
Back of 750 mm bench:15.75 kg.
Seat of 750 mm bench: 21.75 kg.
Back of 1750 mm bench:31.5 kg.
Seat of 1750 mm bench: 43.5 kg.
Back of 3000 mm bench: 63 kg.
Seat of 3000 mm bench: 87 kg