BASE AND LID:
Made out of GG-20 pearlitic cast iron. The base weighs 30 Kg and the lid weighs 13 Kg.
The 3 anchorage bolts are M-16 zinc-coated steel, 410 mm in length.

DIFFUSOR:
30 mm thick molded methacrylate.

ELECTRIC ASSEMBLY:
In L-2560 cast aluminium.

NUTS AND BOLTS:
In A4 stainless steel.

BASE AND LID:
One coat of rust-proof powder primer, rich in zinc. Finished with a polyester resin-based powder coating especially designed for outdoor use.
The standard colour is cast iron black. Contact us for other options.
ELECTRIC ASSEMBLY:
One coat of rust-proof powder primer, rich in zinc.

The bollard is equipped with an E27 lamp-holder and prepared for a 21W PHILIPS- SL-E-PRO lamp or similar

Approximate weight: 47 Kg.

Testing performed by the Laboratorio General de Ensayos e Investigaciones (LGAI):
ELECTRIC SAFETY ACCORDING TO THE UNE EN 60598-1 LV STANDARD:
1998: "Luminaires. General rules and general aspects of testing".
UNE EN 60598-2-3: 1997:
"Luminaires for public lighting"

BREAKING TEST:
Maximum resistance before breakage: 145.3 KN.

PROTECTION RATE
IP 66